Condition-specific New Mexico geothermal guide

New Mexico Rocky Volcanic Terrain Geothermal Installation Guide

A homeowner-focused guide for New Mexico homes where rocky and volcanic terrain, shallow rock, drilling complexity, trenching limitations, slopes, and loop-type tradeoffs. Use it to compare installer proposals, not to perform technical installation work.

This guide follows the structure of the national geothermal installation guide while adapting the questions to New Mexico conditions. It is written for homeowners comparing qualified installers, not for homeowners attempting drilling, trenching, electrical work, water-well work, loop assembly, controls setup, or commissioning.

Homeowner education only: This page is not a construction manual or contractor training guide. Final geothermal design should be performed by qualified professionals who evaluate the home, site, utility locations, water conditions where relevant, local rules, safety requirements, and commissioning data.

Quick-scan condition summary

New Mexico climatearid and high-desert climate with hot desert basins, cold mountain and high-elevation areas, large day-night temperature swings, intense sun, and low water availability.

Ground/site factorsdry soils, rocky and volcanic terrain, caliche or hardpan in places, rural acreage, acequia/water constraints where relevant, small urban lots, and open-loop caution.

Primary planning focusrocky and volcanic terrain, shallow rock, drilling complexity, trenching limitations, slopes, and loop-type tradeoffs.

Loop options should be screened against the property, not chosen from a generic rule.Loop options should be screened against the property, not chosen from a generic rule.

Open-loop and water-source ideas require water quantity, water quality, discharge/return, maintenance, and rule review.Open-loop and water-source ideas require water quantity, water quality, discharge/return, maintenance, and rule review.

A complete proposal should include load basis, loop rationale, site assumptions, testing, commissioning, and owner records.A complete proposal should include load basis, loop rationale, site assumptions, testing, commissioning, and owner records.

New Mexico Rocky Volcanic Terrain condition map / diagram

This simplified condition diagram is a homeowner education aid. It is not an official map or engineering design; actual conditions vary by property and final design requires site-specific evaluation.

This condition page focuses on rocky and volcanic terrain, shallow rock, drilling complexity, trenching limitations, slopes, and loop-type tradeoffs. The diagram shows the homeowner-level relationship among the condition, site evaluation, loop screening, indoor comfort, water or soil uncertainty, access, restoration, and documentation. It avoids precise mapping because a broad diagram cannot replace property-level evaluation.

What rocky volcanic terrain means for New Mexico geothermal planning

For homeowners, rocky volcanic terrain is not a yes-or-no answer. It is a reason to ask more specific questions before selecting equipment or a loop type. In New Mexico, this condition commonly matters because of rocky and volcanic terrain, shallow rock, drilling complexity, trenching limitations, slopes, and loop-type tradeoffs. It can affect the load calculation, outdoor work, drilling or trenching assumptions, water-source caution, indoor distribution, restoration, schedule, and long-term serviceability.

The installer should explain where the condition is likely to matter on the property, how it was evaluated, what evidence was reviewed, and what remains uncertain until field work or professional review is complete. The goal is not to scare homeowners away from geothermal. The goal is to prevent a generic proposal from hiding the condition that will shape the project.

Uncertainty is acceptable when it is documented. A serious installer can say, “we need to verify this before final design.” A red flag is absolute confidence without site evidence.

Installation process adapted to New Mexico rocky volcanic terrain conditions

The same 13-step process from the national guide applies here, but each step should be tied to the actual home and property.

1. Project goals and home suitability

For a New Mexico rocky volcanic terrain project, project goals and home suitability needs to account for rocky and volcanic terrain, shallow rock, drilling complexity, trenching limitations, slopes, and loop-type tradeoffs. This condition can change the homeowner questions even when the national geothermal process stays the same. Why it matters: the condition affects load assumptions, loop screening, access, water or soil uncertainty, restoration, indoor comfort, and long-term service expectations. What homeowners should ask: how does this condition affect this step, what site evidence has been reviewed, what remains unknown, and what records will I receive? Red flags include generic statewide language, no condition-specific site review, no written explanation of loop tradeoffs, no schedule or access plan, and no commissioning or owner-documentation promise. Good installers usually explain the decision path, identify uncertainty, document professional responsibilities, and keep the homeowner out of technical construction tasks.

2. Load calculation and energy analysis

For a New Mexico rocky volcanic terrain project, load calculation and energy analysis needs to account for rocky and volcanic terrain, shallow rock, drilling complexity, trenching limitations, slopes, and loop-type tradeoffs. This condition can change the homeowner questions even when the national geothermal process stays the same. Why it matters: the condition affects load assumptions, loop screening, access, water or soil uncertainty, restoration, indoor comfort, and long-term service expectations. What homeowners should ask: how does this condition affect this step, what site evidence has been reviewed, what remains unknown, and what records will I receive? Red flags include generic statewide language, no condition-specific site review, no written explanation of loop tradeoffs, no schedule or access plan, and no commissioning or owner-documentation promise. Good installers usually explain the decision path, identify uncertainty, document professional responsibilities, and keep the homeowner out of technical construction tasks.

3. Site evaluation

For a New Mexico rocky volcanic terrain project, site evaluation needs to account for rocky and volcanic terrain, shallow rock, drilling complexity, trenching limitations, slopes, and loop-type tradeoffs. This condition can change the homeowner questions even when the national geothermal process stays the same. Why it matters: the condition affects load assumptions, loop screening, access, water or soil uncertainty, restoration, indoor comfort, and long-term service expectations. What homeowners should ask: how does this condition affect this step, what site evidence has been reviewed, what remains unknown, and what records will I receive? Red flags include generic statewide language, no condition-specific site review, no written explanation of loop tradeoffs, no schedule or access plan, and no commissioning or owner-documentation promise. Good installers usually explain the decision path, identify uncertainty, document professional responsibilities, and keep the homeowner out of technical construction tasks.

4. Loop-type screening

For a New Mexico rocky volcanic terrain project, loop-type screening needs to account for rocky and volcanic terrain, shallow rock, drilling complexity, trenching limitations, slopes, and loop-type tradeoffs. This condition can change the homeowner questions even when the national geothermal process stays the same. Why it matters: the condition affects load assumptions, loop screening, access, water or soil uncertainty, restoration, indoor comfort, and long-term service expectations. What homeowners should ask: how does this condition affect this step, what site evidence has been reviewed, what remains unknown, and what records will I receive? Red flags include generic statewide language, no condition-specific site review, no written explanation of loop tradeoffs, no schedule or access plan, and no commissioning or owner-documentation promise. Good installers usually explain the decision path, identify uncertainty, document professional responsibilities, and keep the homeowner out of technical construction tasks.

5. Equipment and system design review

For a New Mexico rocky volcanic terrain project, equipment and system design review needs to account for rocky and volcanic terrain, shallow rock, drilling complexity, trenching limitations, slopes, and loop-type tradeoffs. This condition can change the homeowner questions even when the national geothermal process stays the same. Why it matters: the condition affects load assumptions, loop screening, access, water or soil uncertainty, restoration, indoor comfort, and long-term service expectations. What homeowners should ask: how does this condition affect this step, what site evidence has been reviewed, what remains unknown, and what records will I receive? Red flags include generic statewide language, no condition-specific site review, no written explanation of loop tradeoffs, no schedule or access plan, and no commissioning or owner-documentation promise. Good installers usually explain the decision path, identify uncertainty, document professional responsibilities, and keep the homeowner out of technical construction tasks.

6. Proposal review and scope definition

For a New Mexico rocky volcanic terrain project, proposal review and scope definition needs to account for rocky and volcanic terrain, shallow rock, drilling complexity, trenching limitations, slopes, and loop-type tradeoffs. This condition can change the homeowner questions even when the national geothermal process stays the same. Why it matters: the condition affects load assumptions, loop screening, access, water or soil uncertainty, restoration, indoor comfort, and long-term service expectations. What homeowners should ask: how does this condition affect this step, what site evidence has been reviewed, what remains unknown, and what records will I receive? Red flags include generic statewide language, no condition-specific site review, no written explanation of loop tradeoffs, no schedule or access plan, and no commissioning or owner-documentation promise. Good installers usually explain the decision path, identify uncertainty, document professional responsibilities, and keep the homeowner out of technical construction tasks.

7. Permits, utility locating, and schedule planning

For a New Mexico rocky volcanic terrain project, permits, utility locating, and schedule planning needs to account for rocky and volcanic terrain, shallow rock, drilling complexity, trenching limitations, slopes, and loop-type tradeoffs. This condition can change the homeowner questions even when the national geothermal process stays the same. Why it matters: the condition affects load assumptions, loop screening, access, water or soil uncertainty, restoration, indoor comfort, and long-term service expectations. What homeowners should ask: how does this condition affect this step, what site evidence has been reviewed, what remains unknown, and what records will I receive? Red flags include generic statewide language, no condition-specific site review, no written explanation of loop tradeoffs, no schedule or access plan, and no commissioning or owner-documentation promise. Good installers usually explain the decision path, identify uncertainty, document professional responsibilities, and keep the homeowner out of technical construction tasks.

8. Drilling, trenching, or water-source preparation

For a New Mexico rocky volcanic terrain project, drilling, trenching, or water-source preparation needs to account for rocky and volcanic terrain, shallow rock, drilling complexity, trenching limitations, slopes, and loop-type tradeoffs. This condition can change the homeowner questions even when the national geothermal process stays the same. Why it matters: the condition affects load assumptions, loop screening, access, water or soil uncertainty, restoration, indoor comfort, and long-term service expectations. What homeowners should ask: how does this condition affect this step, what site evidence has been reviewed, what remains unknown, and what records will I receive? Red flags include generic statewide language, no condition-specific site review, no written explanation of loop tradeoffs, no schedule or access plan, and no commissioning or owner-documentation promise. Good installers usually explain the decision path, identify uncertainty, document professional responsibilities, and keep the homeowner out of technical construction tasks.

9. Loop installation and field assembly

For a New Mexico rocky volcanic terrain project, loop installation and field assembly needs to account for rocky and volcanic terrain, shallow rock, drilling complexity, trenching limitations, slopes, and loop-type tradeoffs. This condition can change the homeowner questions even when the national geothermal process stays the same. Why it matters: the condition affects load assumptions, loop screening, access, water or soil uncertainty, restoration, indoor comfort, and long-term service expectations. What homeowners should ask: how does this condition affect this step, what site evidence has been reviewed, what remains unknown, and what records will I receive? Red flags include generic statewide language, no condition-specific site review, no written explanation of loop tradeoffs, no schedule or access plan, and no commissioning or owner-documentation promise. Good installers usually explain the decision path, identify uncertainty, document professional responsibilities, and keep the homeowner out of technical construction tasks.

10. Fusion, flushing, pressure testing, and fluid setup

For a New Mexico rocky volcanic terrain project, fusion, flushing, pressure testing, and fluid setup needs to account for rocky and volcanic terrain, shallow rock, drilling complexity, trenching limitations, slopes, and loop-type tradeoffs. This condition can change the homeowner questions even when the national geothermal process stays the same. Why it matters: the condition affects load assumptions, loop screening, access, water or soil uncertainty, restoration, indoor comfort, and long-term service expectations. What homeowners should ask: how does this condition affect this step, what site evidence has been reviewed, what remains unknown, and what records will I receive? Red flags include generic statewide language, no condition-specific site review, no written explanation of loop tradeoffs, no schedule or access plan, and no commissioning or owner-documentation promise. Good installers usually explain the decision path, identify uncertainty, document professional responsibilities, and keep the homeowner out of technical construction tasks.

11. Indoor equipment and distribution integration

For a New Mexico rocky volcanic terrain project, indoor equipment and distribution integration needs to account for rocky and volcanic terrain, shallow rock, drilling complexity, trenching limitations, slopes, and loop-type tradeoffs. This condition can change the homeowner questions even when the national geothermal process stays the same. Why it matters: the condition affects load assumptions, loop screening, access, water or soil uncertainty, restoration, indoor comfort, and long-term service expectations. What homeowners should ask: how does this condition affect this step, what site evidence has been reviewed, what remains unknown, and what records will I receive? Red flags include generic statewide language, no condition-specific site review, no written explanation of loop tradeoffs, no schedule or access plan, and no commissioning or owner-documentation promise. Good installers usually explain the decision path, identify uncertainty, document professional responsibilities, and keep the homeowner out of technical construction tasks.

12. Controls, startup, and commissioning

For a New Mexico rocky volcanic terrain project, controls, startup, and commissioning needs to account for rocky and volcanic terrain, shallow rock, drilling complexity, trenching limitations, slopes, and loop-type tradeoffs. This condition can change the homeowner questions even when the national geothermal process stays the same. Why it matters: the condition affects load assumptions, loop screening, access, water or soil uncertainty, restoration, indoor comfort, and long-term service expectations. What homeowners should ask: how does this condition affect this step, what site evidence has been reviewed, what remains unknown, and what records will I receive? Red flags include generic statewide language, no condition-specific site review, no written explanation of loop tradeoffs, no schedule or access plan, and no commissioning or owner-documentation promise. Good installers usually explain the decision path, identify uncertainty, document professional responsibilities, and keep the homeowner out of technical construction tasks.

13. Homeowner walkthrough, documentation, and maintenance expectations

For a New Mexico rocky volcanic terrain project, homeowner walkthrough, documentation, and maintenance expectations needs to account for rocky and volcanic terrain, shallow rock, drilling complexity, trenching limitations, slopes, and loop-type tradeoffs. This condition can change the homeowner questions even when the national geothermal process stays the same. Why it matters: the condition affects load assumptions, loop screening, access, water or soil uncertainty, restoration, indoor comfort, and long-term service expectations. What homeowners should ask: how does this condition affect this step, what site evidence has been reviewed, what remains unknown, and what records will I receive? Red flags include generic statewide language, no condition-specific site review, no written explanation of loop tradeoffs, no schedule or access plan, and no commissioning or owner-documentation promise. Good installers usually explain the decision path, identify uncertainty, document professional responsibilities, and keep the homeowner out of technical construction tasks.

Loop type guidance and implications

No loop type is automatically right for this page. A qualified installer should screen each option against the home, property, water, ground, access, maintenance expectations, and local requirements.

Horizontal closed loop

Horizontal closed loops may be considered where usable land, soil, separation from utilities and septic or wells, drainage, access, and restoration make sense. For this New Mexico page, homeowners should ask how rocky and volcanic terrain, shallow rock, drilling complexity, trenching limitations, slopes, and loop-type tradeoffs affects trenching, backfill, spacing, and long-term protection. A red flag is choosing horizontal loops from acreage alone without soil, water, and restoration review.

Vertical closed loop

Vertical closed loops may be relevant where the surface footprint is limited, trenching is constrained, or a drilled borefield is more practical. Homeowners should ask about drilling access, geologic assumptions, grout or sealing, bore spacing, utility conflicts, and what happens if subsurface conditions differ from expectations. A red flag is vague drilling responsibility or no as-built borefield record.

Pond/lake closed loop

Pond or lake closed loops require a suitable water body, stable depth, permissions, routing, protection, and environmental review. The loop is sealed; it is not an open discharge. Homeowners should ask how water level, access, ownership, depth, and maintenance will be verified. A red flag is assuming any pond, lake, or canal-like water feature is automatically suitable.

Open-loop well system

Open-loop systems require groundwater quantity, water quality, filtration, heat-exchanger protection, discharge or return review, maintenance planning, and local rule review. In water-limited, wet-site, or groundwater-sensitive areas, this should be treated cautiously. A red flag is treating an existing well as automatically suitable without testing and written operating requirements.

Standing column well

Standing-column wells are specialized and regional. They require appropriate geology, water quality, experienced design, and local rule review. They should not be presented as a universal option for New Mexico. Homeowners should ask what local evidence supports the concept and what alternatives were considered.

New Mexico Rocky Volcanic Terrain evaluation checklist

Home and load

Room-by-room load calculation
Envelope, windows, leakage, and ventilation assumptions
Duct, hydronic, airflow, or indoor distribution review
Controls, backup or auxiliary strategy where relevant

Ground and water

dry soils, rocky and volcanic terrain, caliche or hardpan in places, rural acreage, acequia/water constraints where relevant, small urban lots, and open-loop caution
Soil/rock/water assumptions documented
Open-loop or water-source caution where relevant
What needs further professional review before final design

Access and restoration

Drill or trench equipment access
Utility locating and separation
Driveway, hardscape, landscaping, slope, drainage, and restoration
Weather, dust, wet-site, snow, or heat constraints where relevant

Records

Written loop-type rationale
Testing and commissioning readings
As-built loop or borefield map
Owner packet, manuals, warranties, and service contacts

New Mexico proposal comparison checklist

Geothermal proposal comparison checklist — Use this national checklist image while comparing state and condition-specific proposals for design basis, loop scope, indoor work, commissioning, warranty, and documentation.

Proposal item	Complete proposal should include	Why it matters here	Ask	Red flag
Load basis	Room-by-room calculation and local assumptions.	arid and high-desert climate with hot desert basins, cold mountain and high-elevation areas, large day-night temperature swings, intense sun, and low water availability affects comfort and equipment selection.	What assumptions are documented?	Square-foot sizing.
Loop rationale	Why options were accepted or rejected.	rocky and volcanic terrain, shallow rock, drilling complexity, trenching limitations, slopes, and loop-type tradeoffs can change practicality.	Why this loop for this site?	One-size-fits-all loop.
Site scope	Access, utilities, soil, water, drilling/trenching, restoration, exclusions.	Outdoor surprises can change schedule and cost responsibility without quoting numbers.	What conditions change scope?	Vague exclusions.
Commissioning	Flow, temperatures, controls, startup, backup operation, owner walkthrough.	Records help future service and comfort troubleshooting.	What readings will I receive?	No written startup data.

New Mexico homeowner questions checklist

What local climate and home-load assumptions are being used?
How does this proposal address rocky and volcanic terrain, shallow rock, drilling complexity, trenching limitations, slopes, and loop-type tradeoffs?
Which loop types were considered and why were some ruled out?
What utility, septic, well, water, hardscape, landscaping, drainage, slope, dust, snow, heat, or access issues apply?
What permits, inspections, or utility locates are included?
What commissioning readings, as-built drawings, manuals, and maintenance expectations will I receive?

New Mexico Rocky Volcanic Terrain red flags

Geothermal buyer red flags infographic — This national red-flags graphic is reused; the text on this page adds state and condition-specific warning signs.

No room-by-room load calculation or local climate basis.
Loop type selected before site and utility review.
No written explanation of rocky and volcanic terrain, shallow rock, drilling complexity, trenching limitations, slopes, and loop-type tradeoffs.
Open-loop proposal without water quantity, water quality, discharge/return, maintenance, and local-rule review.
No clear drilling, trenching, access, restoration, or excluded-condition responsibility.
No testing, commissioning, owner walkthrough, or as-built records promised.
Pressure to sign before the property-specific uncertainties are documented.

How to use this guide before signing a proposal

Ask the installer to narrate the decision path in plain English: the home load, the site observations, the loop-screening logic, the indoor distribution review, the water or ground uncertainty, the access and restoration plan, the commissioning process, and the records you will receive. For this page, the decision path should specifically address rocky and volcanic terrain, shallow rock, drilling complexity, trenching limitations, slopes, and loop-type tradeoffs. If that condition is not mentioned in the proposal, ask whether it was evaluated or why it is not relevant.

A homeowner does not need proprietary design math, but the proposal should be traceable. You should be able to understand why the installer recommends a horizontal loop, vertical loop, pond/lake loop, open-loop system, or no geothermal project at all. You should also understand what could change the design after further evaluation. A professional answer can include uncertainty. A weak answer often sounds certain because it has skipped the condition-specific work.

Keep your role clear. You are not responsible for drilling, trenching, fusing pipe, wiring equipment, modifying wells, setting controls, or commissioning a heat pump. Your role is to hire qualified professionals, compare written scopes, preserve documentation, ask about local conditions, and avoid proposals that leave critical assumptions unstated. That boundary protects homeowners and keeps technical work with qualified trades.

For New Mexico, also ask how future service will work. A geothermal system should come with enough documentation for another qualified technician to understand the design later: loop or borefield map, equipment information, startup readings, pressure-test or flow records, controls notes, warranty boundaries, maintenance expectations, and service contacts. The more unusual the site condition, the more important these records become.

Finally, compare proposals on completeness rather than confident language. The stronger proposal usually explains what was measured, what was assumed, what is excluded, what needs verification, and what records will be delivered. The weaker proposal relies on generic claims, incomplete scope, or a single loop type presented as obvious without connecting it to your home and property.

Internal links and next steps

Find geothermal installers in New Mexico Request geothermal quotes Browse geothermal installers View directory map

For the broader installation framework, use the national geothermal installation guide and the main New Mexico geothermal installation guide.

New Mexico Rocky Volcanic Terrain Geothermal Installation Guide FAQ

Is geothermal practical for New Mexico homes?

It can be practical for some homes, but suitability depends on the home load, indoor distribution, property conditions, loop or water-source options, access, local rules, commissioning, and serviceability. This page is meant to help homeowners ask those questions before signing.

Which loop type is right for this New Mexico situation?

There is no universal loop type. Horizontal, vertical, pond/lake, open-loop, and standing-column concepts should be screened against the actual property, water conditions, soil or rock, usable land, access, and professional design requirements.

Should I avoid open-loop systems?

Not automatically, but open-loop proposals deserve extra caution. Ask for water quantity, water quality, discharge or return, filtration, heat-exchanger protection, maintenance expectations, and local rule review before treating an existing well as suitable.

What records should I ask for?

Ask for the load summary, site-evaluation notes, loop-type rationale, utility-locate and permit responsibilities, testing records, commissioning readings, controls explanation, as-built loop map, manuals, warranty information, and maintenance expectations.

Is this page a technical installation guide?

No. It is a homeowner planning and proposal-comparison guide. Technical design, drilling, excavation, electrical work, water-source work, controls setup, and commissioning should be handled by qualified professionals.

Sources and references

New Mexico — State Climate Summaries 2022 — NOAA National Centers for Environmental Information. Used for New Mexico arid climate, desert heat, mountain cold, and precipitation context.
New Mexico Bureau of Geology and Mineral Resources — New Mexico Tech. Used for rocky, volcanic, basin, and subsurface geology context.
New Mexico Office of the State Engineer — State of New Mexico. Used for water-resource and groundwater caution.
New Mexico NRCS — USDA Natural Resources Conservation Service. Used for arid soils and site-condition context alongside Web Soil Survey.
Geothermal Heat Pumps — U.S. Department of Energy Energy Saver. Used for national geothermal heat-pump fundamentals and loop-type context.
Geothermal Heat Pumps — ENERGY STAR. Used for homeowner quality-installation context and general geothermal heat-pump background.
Web Soil Survey — USDA Natural Resources Conservation Service. Used for parcel-level soil-screening context and to reinforce that local soil review matters.

Homeowner Installation Planning Checklist

Use this checklist with the existing New Mexico guide context. It organizes contractor questions; it does not replace parcel-level investigation or current local requirements.

Site & ground conditions

State context: Homeowner-focused New Mexico geothermal installation guide covering desert heat, high-elevation cold, dry soils, rocky/volcanic terrain, low water availability, loop options, installer questions, and red flags.
Desert Climate: Ask how dry ground, cooling demand, water constraints and restoration assumptions influence ground heat exchange and loop selection.
Dry Soil: Ask what soil profile and moisture assumptions support trenching, thermal performance, backfill, compaction, drainage and restoration scope.
Rock: Ask what subsurface evidence supports the drilling or excavation method, production assumptions, spoils handling, bore sealing and changed-condition pricing.
Water Constraints: Ask how groundwater, drainage, nearby wells, septic components, dewatering, discharge and water-quality constraints affect the proposed loop.
Property conflicts: Mark utilities, wells, septic components, drainage, easements, structures and protected landscaping before fixing a loop location.
Access and restoration: Document equipment access, staging, spoils, dewatering where relevant, weather limits and responsibility for restoring disturbed surfaces.

System design

Load basis: Request a room-by-room heating and cooling load calculation tied to the actual envelope, ventilation, occupancy and local design weather.
Loop rationale: Require the proposal to explain the selected loop type, sizing assumptions, layout, materials, pumping and why alternatives were rejected.
Indoor system: Confirm that ducts or other distribution, airflow, electrical capacity, condensate handling, controls and auxiliary heat were evaluated.

Proposal review

Normalize scope: Compare equipment model and capacity, loop materials, drilling or excavation, grouting or backfill, electrical, ducts, permits, disposal and restoration.
Define responsibilities: Identify every subcontractor, permit owner, commissioning party, warranty provider, exclusion, allowance and changed-condition trigger.
Commissioning: Require recorded airflow, temperatures, loop flow or pressure, pump and control operation, auxiliary heat checks and homeowner instruction as applicable.

Before work begins

Keep the signed scope, load calculation, site and loop drawings, equipment data, permit plan, schedule, payment terms, warranties and change-order process together.
Confirm utility marking, access dates, protection of wells and septic systems, restoration limits, startup records and the final documents the contractor will deliver.